← All research

Simulation study · Fermentation

Where should yeast oxygen and feed tests focus?

A public yeast metabolic model mapped where oxygen capacity became limiting as glucose supply increased. The result helps select scale-down experiments before committing to reactor trials.

The decision

Feeding more glucose can raise the demand for oxygen, but the useful test region depends on both inputs. Before a scale-down study, a team needs to choose where to probe growth loss and overflow metabolism, instead of spreading experiments evenly across an unbounded design space.

Ayomic screened 40 oxygen-by-glucose conditions with Yeast-GEM v9.1.0. The question was narrow: under this steady-state model, how much oxygen uptake capacity is needed before added oxygen stops improving the growth-maximizing solution?

A more focused test map

The modeled transition moved upward with glucose capacity. At glucose uptake caps of 1, 5, and 10 mmol per gram dry cell weight per hour, the estimated critical oxygen caps were about 5, 15, and 22.4 in the same uptake units. At glucose caps of 15 and 20, the transition lay at or beyond the 30-unit scan boundary, so the study did not resolve a sufficient oxygen cap for those conditions.

Model-estimated oxygen uptake capacity at the growth transition; bars use the 0–30 mmol/gDW/h scan range. These are metabolic-model bounds, not reactor oxygen-transfer setpoints.
Oxygen transition by imposed glucose uptake capacity, mmol/gDW/h
Glucose cap Critical oxygen cap Interpretation
1 ≈ 5 Resolved in scan
5 ≈ 15 Resolved in scan
10 ≈ 22.4 Resolved in scan
15 and 20 ≥ 30 Right-censored; sufficient cap unknown

At the baseline glucose cap of 10, the model predicted 0.837 h−1 growth, 0.465 g/g biomass yield, and 22.35 mmol/gDW/h oxygen uptake. Low oxygen relative to glucose coincided with simulated ethanol overflow. These outputs suggest where to sample, not what a vessel will achieve.

From model map to experiment

The study used growth-maximizing flux balance analysis with COBRApy 0.32.1 and GLPK on the published Yeast-GEM v9.1.0 model. It checked the grid outputs and proposed three scale-down tests around oxygen/feed transitions. A practical experiment would vary feed and oxygen availability, then measure growth, substrate uptake, and ethanol formation against the predicted pattern.

This narrows the first experimental search. It does not claim that a metabolic uptake cap directly translates to an oxygen-transfer rate, agitation setting, or feeding recipe.

What the model cannot settle

  • No strain-specific experimental fitting, kinetic or regulatory model, or reactor mixing model was used.
  • Oxygen transfer, gradients, and dynamic feed response still need physical scale-down measurements.
  • The model returns zero growth under strict anaerobic settings here. That is a known model-structure gap, not a claim about yeast biology.

All reported values are steady-state simulation results. The proposed experiments have not established real-world performance.

Sources

Study snapshot: 1 October 2026. The model is the official Yeast-GEM v9.1.0 release (licensed CC BY 4.0). See the Yeast9 publication for the model context.

See how Ayomic approaches simulation and comparison